Frame Assembly Instructions

Getting your puzzle into its custom frame is not as hard as it may first look.   Watch the video below or call us at 303-444-1442 and we will walk you through it.

VIDEO INSTRUCTIONS:

 

FRAME ASSEMBLY INSTRUCTIONS:

  • We recommend sliding the completed puzzle off of the table it was assembled on and onto a large piece of cardboard.
  • Peel both protective sheets off of each piece of plexi-glass.
  • Place one piece of plexi-glass on top of the assembled puzzle that is now on the cardboard.
  • Pancake the puzzle between the plexi-glass and cardboard with your hands and flip over.
  • Remove the cardboard and place the second piece of plexi-glass on the puzzle.
  • Assemble one corner of the frame using the provided hardware. (Make sure to use both a flat “L” piece and an “L” piece with screws at each corner to connect the edges.) Tighten the screws to ensure a tight hold.
  • Place the puzzle (now between the two pieces of plexi-glass) on top of the puzzle box.
  • Place the assembled frame corner on one edge of the puzzle
  • Make sure the glass and puzzle are fully inside the frame’s edges
  • Assemble the other two sides individually and tighten all hardware
  • Add the included hanging bolts and enjoy!